Corner Parameters
This window contains the corner options to be applied at toolpath level (not on the CAD geometry).
This step is divided in two parts: round options and corner options.
You have to select at least one cut (process) to be able to fill the parameters.
In case of corners options, once one cut has been selected, the corner types are enabled. When a corner type is selected, you can assign values in the parameters panel, where there is a common part to all the types (ranges and elements that will be affected) and there is an specific part with the determining parameters of the geometric figure that is going to be applied.
For a detailed description of these parameters and how they affect to the toolpath, see the Corners Tab process.
The corners step is finished. Click 
to go to the next step or 
to exit from the Wizard without saving data.
